AR-250
Roller Gear Cam Rotary Table: Redefining Absolute Motion Precision
In the evolution of precision machining, every technological leap is a pursuit of purer "control." The HYDEX AR Series transcends the limitations of traditional friction and wear by utilizing revolutionary Roller Gear Cam technology, evolving rotary motion from "sliding" to "rolling." This is more than a performance upgrade; it is an artistic expression of uncompromising precision.
High Efficiency
Rolling transmission dramatically reduces energy loss, granting the machinery agile, cat-like responsiveness.
Thermal Stability
Extremely low friction coefficients suppress thermal deformation, ensuring stable machining precision even during long-term operation.
Timeless Precision
High-hardness carburized steel construction reduces wear to near zero, breaking the industrial destiny of "precision decay over time."
AR-250 | ||
| Table Diameter | Ø250 mm | |
| Spindle Hole | Ø75H7 | |
| Center Height | 160 mm | |
| Total Speed Reduction Ratio | 60 | |
| Max0 Rotation Speed (3000 rpm) | 50 rpm | |
| Indexing Accuracy | ±10 sec | |
| Repeatability | 4 sec | |
| Weight (without motor) | 107 kg | |
| Resource | 5 | |
| Locking Method | Hydeaulic | |
| Output Braking Torque | 882 Nm | |
| Allowable Work Weight | Vertical : 185 kg Horizontal : 360 kg | |
| Maximum Load (when the rotary table is clamped) | | 3200 kgf |
| 100 kgf-m | |
| 314 kgf-m | |
| Allowable Work Inertia | 3.48 kg-m² | |
HYDEX reserves the right to change designs and specifications.
HYDEX reserves the right to change designs and specifications.