AR-200
Roller Gear Cam Rotary Table: Redefining Absolute Motion Precision
In the evolution of precision machining, every technological leap is a pursuit of purer "control." The HYDEX AR Series transcends the limitations of traditional friction and wear by utilizing revolutionary Roller Gear Cam technology, evolving rotary motion from "sliding" to "rolling." This is more than a performance upgrade; it is an artistic expression of uncompromising precision.
High Efficiency
Rolling transmission dramatically reduces energy loss, granting the machinery agile, cat-like responsiveness.
Thermal Stability
Extremely low friction coefficients suppress thermal deformation, ensuring stable machining precision even during long-term operation.
Timeless Precision
High-hardness carburized steel construction reduces wear to near zero, breaking the industrial destiny of "precision decay over time."
AR-200 | ||
| Table Diameter | Ø200 mm | |
| Spindle Hole | Ø60H7 | |
| Center Height | 160 mm | |
| Total Speed Reduction Ratio | 36 | |
| Max0 Rotation Speed (3000 rpm) | 83.3 rpm | |
| Indexing Accuracy | ±10 sec | |
| Repeatability | 4 sec | |
| Weight (without motor) | 68 kg | |
| Resource | 5 | |
| Locking Method | Pneumatic | |
| Output Braking Torque | 192 Nm | |
| Allowable Work Weight | Vertical : 100 kg Horizontal : 200 kg | |
| Maximum Load (when the rotary table is clamped) | | 2100 kgf |
| 80 kgf-m | |
| 122 kgf-m | |
| Allowable Work Inertia | 2.25 kg-m² | |
HYDEX reserves the right to change designs and specifications.
HYDEX reserves the right to change designs and specifications.
Recommend
HFT Series
Disc Taikstock: Defining the Zenith of Heavy-Duty Rigidity
In heavy-duty machining where material removal rates are paramount, stability is the only truth. The HYDEX HFT Series Disc Tailstock is engineered specifically for high-torque and large-scale workpieces—acting as the unyielding pillar for your rotary table to ensure flawless precision even under extreme loads.
HFTS Series
Heavy-Duty Non-Braking Disc Tailstock: The Pure Foundation of Heavy-Duty Machining
In the highest realm of industrial design, "less" is often "more." The HYDEX HFTS Series Heavy-Duty Non-Braking Disc Tailstock eliminates complex braking mechanisms to pour all engineering focus into sheer rigidity and support. It stands as the most composed and pure lateral guardian for heavy-duty long-shaft machining.
HMT Series
Thimble tailstock: Redefining Stability in Shaft Machining
In the realm of precision machining, the challenge of long-shaft workpieces begins with the absolute protection of the "center." The HYDEX HMT Thimble Tailstock Series is engineered for perfect synchronization with AR series rotary tables, gracefully neutralizing physical deflection to ensure your craftsmanship remains rock-solid.